Yamaha YB50 - Page 53

ENG
ENGINE REMOVAL
4-2
CABLES AND PIPES
1. Remove:
• Oil pipe  from side of oil pump.
NOTE:
Position oil pipe so that the oil does not spill
out.
2. Remove:
• Bolts  (trunk)
• Overflow bowl rivets
NOTE:
To remove the overflow bowl, take off the fuel
and oil caps and replace them immediately
after removing the bowl.
3. Disconnect:
• Battery cable 
• Starter motor cable 
• Magnetic flywheel cable 
• Spark plug pipe
4. Remove:
• Rear brake cable 
1