Pairing with a Different Device
Follow the steps below to pair with another Bluetooth device, or to try pairing with the same device again.
[Search tag] #Q02 Pairing
1 Set this product to pairing (registration) standby mode.
With this product powered off, hold down the power key until the indicator flashes as shown in
the illustration below. You will hear the “Pairing” audio message, and the product enters
pairing (registration) standby mode.
Red and blue
Flashes
alternately
5 sec
Blue
Lights up for 1 sec
2 Activate Bluetooth on the Bluetooth device.
A list of Bluetooth devices that can be connected will be shown.
19
Bluetooth® Connectivity > Pairing with a Different Device
To Next Page
Loading...
