Yamaha YZF - Page 43

PRE-OPERATION CHECKS
4-2
4
Throttle grip
• Make sure that operation is smooth.
• Check cable free play.
• If necessary, have Yamaha dealer adjust cable free play and lubricate cable and
grip housing.
6–22, 6-33
Control cables
• Make sure that operation is smooth.
• Lubricate if necessary.
6-33
Drive chain
• Check chain slack.
• Adjust if necessary.
• Check chain condition.
• Lubricate if necessary.
6-31
Wheels and tires
• Check for damage.
• Check tire condition and tread depth.
• Check air pressure.
• Correct if necessary.
6-23–6-26
Brake and shift pedals
• Make sure that operation is smooth.
• Lubricate pedal pivoting points if necessary.
6-33
Brake and clutch levers
• Make sure that operation is smooth.
• Lubricate lever pivoting points if necessary.
6-34
Sidestand
• Make sure that operation is smooth.
• Lubricate pivot if necessary.
6-34
Chassis fasteners
• Make sure that all nuts, bolts and screws are properly tightened.
• Tighten if necessary.
—
Instruments, lights, signals
and switches
• Check operation.
• Correct if necessary.
—
Sidestand switch
• Check operation of ignition circuit cut-off system.
• If system is defective, have Yamaha dealer check vehicle.
3-17
Air intake duct
• Check that the screen is not clogged.
• Clean if necessary.
6-21
ITEM CHECKS PAGE
U5AH16.book Page 2 Wednesday, May 8, 2002 9:16 AM