Digital Controller SIO Driver
GP-Pro EX Device/PLC Connection Manual
51
Settings of External Device
To configure communication settings for the External Device, use the FUNC, PARA, ENT, DISP, Down and Up
keys on the front of the Controller. Refer to your Controller manual for details.
Procedure
1
In the basic display, press the PARA key while holding down the FUNC key to move to the setting group selection screen.
2 Press the PARA key several times to display the setup data setting group, and press the ENT key.
3 Press the Down/Up keys several times to select a setup item and press the ENT key.
4 Use the Down/Up keys to select a setting and press the ENT key.
5 Press the DISP key to move to the basic display.
Settings
Setup Items Settings
C84 1
C85 0
C93 0
• The parameters to be set vary depending on the Controller. Refer to your Controller manual
for details.
To Next Page
Loading...
Need help?
General
