Yamatake DMC10 Series User Manual

Digital Controller SIO Driver
GP-Pro EX Device/PLC Connection Manual
67
 Settings of External Device
To configure communication settings for the External Device, use the para, enter, display, and cursor keys on the
front of the Controller.
Refer to your Controller manual for details.
 Procedure
1 In the operation display, press and hold the para key (for 2 seconds) to move to PARA bank mode.
2 Press the para key to display RS-485 communication bank mode (rS485).
3 Press the enter key to move to RS-485 communication bank mode.
4 Press the para key to select a setup item and press the enter key.
5 Use the cursor keys to select a setting and press the enter key.
6 Press the display key to move to the operation display.
7 Reboot the External Device.
 Settings
Setup Items Settings
Com.02 1
Com.03 2
Com.04 1
Com.05 0
Com.06 0
Com.07 3
• The parameters to be set vary depending on the Controller. Refer to your Controller manual
for details.

Yamatake DMC10 Series Specifications

General

Brand	Yamatake
Model	DMC10 Series
Category	Controller
Language	English