11. Remote control (Optional)
180
(2) Clutch control
(3) Engine stop
Usually, when an engine is stopped, the stop button of
an instrument panel is pushed, and the engine is
stopped.
Moreover, an emergency stop button after the stop
solenoid is pushed, and the engine is stopped.
Retainer
Clamp
Spacer
Cable bracket
Clutch flange
(Remote control cable clamp)
Neutral
S1 S2
Clamp
To engine speed To marine gear
Reverse Forward
Remote control head
Note : ( ) Cable shift travel
S1 = More than 36 mm (1.42")
S2 = More than 36 mm (1.42")
(KM2P-1 marine gear)
Bolt (M8 x 25)
Bolt (M8 x 25)
Side cover
Connector
Holder
Shift lever
Washer
Lock nut (M6)
Bolt
Shims
Stop solenoid
Governor
O-ring
Emergency stop button
To Next Page
Loading...
