ENGINE OPERATION
6LT Series Operation Manual
37
CHECKING THE ENGINE AFTER
OPERATION
• Check that battery switch is turned to OFF.
• Fill the fuel tank.
• Close seacock(s).
• If there is a risk of freezing, check that the cooling
system contains enough coolant. See page 28.
• If there is a risk of freezing, drain the seawater
system.
• At temperatures below 0 °C (32 °F), drain
seawater system and connect the engine heater
(if equipped).
Check fluid levels
See instructions in Before You Operate on page 25.
To Next Page
Loading...
