INSPECTION AND MAINTENANCE
6LT Series Operation Manual
45
MAINTENANCE PROCEDURES
CHECK THE ENGINE OIL LEVEL
Figure 1
Only check when the engine is cool and not running to avoid burns.
• Using the dipstick (2), check that the oil level is between the “Min” and “Max” levels.
• If the level is low, remove the filler cap (1) and top up through the filler port on the cylinder head cover.
ATTENTION: After topping up the oil, make sure that the level does not exceed the “Max” notch on the
dipstick. Make sure that the dipstick is fully inserted and that the filler cap is tightened fully in the clockwise
direction.
CHECK THE OIL LEVEL IN THE MARINE GEAR
Check the level of the oil in the Marine Gear following the instructions provided in the manual supplied by
the Manufacturer.
To Next Page
Loading...
