Yanmar SA Series - Operator Seat and Controls Setup

7-2
7. OPERATE THE ENGINE
SA221/324/424 Operation Manual
(A) Fuel shut-off valve
(O) ON (open) position
(C) OFF (closed) position
2. Get on the Tractor
1. Always use the step located on the left side of the
tractor to climb on the tractor.
2. Sit on the operator seat.
3. Adjust the Operator Seat
1. Sit on the operator seat.
2. Operator seat forward and backward lever.
• Move the operator seat forward and backward
lever to set the optimal position.
(A) Operator seat forward and backward lever
(a) Toward the front
(b) Toward the rear
(c) Unlock
(d) Lock
4. Fasten the Retractable Seatbelt
1. Pull out the retractable seatbelt from the retracted
position located on the right side of the operator
seat.
2. Fasten the retractable seatbelt to the buckle
located on the left side of the operator seat
(A) Buckle
(a) Retractable seatbelt
3. Adjust the retractable seatbelt to the suitable
length.
IMPORTANT
●After adjusting the operator seat position, always
ensure that the operator seat is securely locked in
place.
(A)
(O)
(C)
(A)
(a)
(b)
(c)
(d)
●Always keep the retractable seatbelt fastened
while operating the tractor with the Roll-Over
Protective Structure (ROPS) in the upright
position.
●The preceding action reduces the possibility
of injury or death in the event of an accident
such as an overturn or roll over.
●Do not under any circumstances use the
retractable seatbelt when operating the
tractor:
• with the Roll-Over Protective Structure
(ROPS) in the folded position.
NOTE
●Do not twist the retractable seatbelt.
NOTE
●Release the retractable seatbelt by pressing the
retractable seatbelt quick release button.
! WARNING
(a)
(A)
SA221_324_424_OperatorsManual.book 2 ページ ２０１８年６月４日 月曜日 午後５時１９分