Yanmar SA Series - Level the Implement Side to Side

10-5
10. 3-POINT HITCH AND DRAWBAR
SA221/324/424 Operation Manual
(A) Top link
(B) Top link hook
(C) Locknut
(D) Top link body
5. Raise the implement.
Check if the desired levelness is attained. Re-
adjust the top link as necessary.
6. Once the desired levelness is attained, tighten the
locknut.
■ Level the Implement Side to Side
1. Park the tractor safely and securely.
• For details, see "7. Safe Practices for Parking the
Tractor" on page 1-7.
2. Chock all the tires safely and securely.
3. Lower the implement to the ground.
4. Loosen the locknut located on the lift link right.
5. Rotate the body of the lift link right to raise or
lower the lower link.
Do the preceding action until the desired
levelness of the implement is attained.
6. Tighten the locknut.
(A) Locknut
(B) Lift link right
IMPORTANT: Avoid damage!
● Avoid over turning the top link body all the way to
the end, the preceding action can damage the
threads.
(A)
(D)
(C)
(B)
(B)
(A)
10_3pointHitch.fm 5 ページ ２０１８年７月６日 金曜日 午前９時４７分