Yanmar SA Series - Perform Engine Warm-up and Checks

7-4
7. OPERATE THE ENGINE
SA221/324/424 Operation Manual
7. Perform the Rest of the Operations
1. Move the range shift lever to the neutral position.
(SA324/424)
(A) Range shift lever (SA324/424)
(c) N (Neutral position)
2. Push down the Power Take Off (PTO) switch to
OFF position.
(A) Power Take Off (PTO) switch
(a) OFF position
(b) ON position
3. Push the 3-point hitch control lever forward to the
lowest position and lower the mid- or rear
mounted implements to the ground.
<SA221>
<SA324/424>
(A) 3-point hitch control/cutting height
adjustment lever
(a) Lowest position (SA324/424)
(b) Lower position (SA221)
(c) Neutral (SA221)
IMPORTANT: Avoid damage!
●Avoid depressing the forward and reverse drive
pedal while the parking brake is engaged.
(a)
(b)
(c)
(A)
(b)
(a)
(c)
(A)
(a) (b)
NOTE
●Use the implement control lever to lower any
attached implements to the ground.
(A)
(c)
(b)
(A)
(a)
SA221_324_424_OperatorsManual.book 4 ページ ２０１８年６月４日 月曜日 午後５時１９分