PERIODIC MAINTENANCE
24 SD60 Operation Manual
Oil Change
Oil change procedure/Drain from lower
plug of sail drive
1. Un-screw the oil dipstick.
Figure 4
2. Prepare a suitable container to collect
the lubricating oil.
Remove the lower plug and drain the
oil.
Dispose of used oil properly.
Figure 5
3. Connect a hand oil pump onto the fitting
of the oil drain hole in the SD60 drive.
Be careful not to damage the thread of
the drain hole.
Figure 6
SD60_OPM.book 24 ページ ２０１７年１２月８日 金曜日 午後３時６分
To Next Page
Loading...
