Yaohua Weighing System XK3190-A15 - Keypad Functions; Combined Key Functions

Sepalizing in indicator,Being perfect in indicator
Shanghai Yaohua Weighing System Co.,Ltd.
6
3. Keypad(all valid in weighing status)
3.1. Function of single key
A [Zero]:Indicator will come to zero,the ”Zero” light will be
on;Press [Zero] again,it will come to the gross weight
status,the “Zero” light will be off
B [Tare]:The current weight value will be regarded as tare
weight,the “Tare” light will be on.
C [M+]:The current sum(quantity) will be added to the
accumulated value.The u.p(u.w) display will show the
accumulated number,the sum(quantity)display will show the
accumulated value,the “M+” light will be on.When the value is
over 999999,the sum(quantity) display will show”Over”.
D [MC]:The accumulated number and accumulated sum(quatity) will
be cleared out.The “M+” light will be off.
E [Delete]:Delete the current input u.p(u.w) value
F [.Value]:In counting status,press this key,decimal point for
the u.w can be entered into.
G [Quantity]:Confirm key while setting parameter;Confirm key
while setting quantity number in counting operation
H [Unit W]:Confirm key while setting unit weight;Quit key while
setteing parameter
I [On]:Turn on the indicator
J [Off]:Turn off the indicato
K [0~9]:Numeric key
3.2. Function of combined keys
A [Quantity]+[.Value]:When the calibration jumper is plugged
on,first press[Quantity],then press[.Value],it will enter
into calibration status