Yard Machines MCT333707 User Manual

12
MAINTENANCE AND REPAIR INSTRUCTIONS
AIR FILTER
To clean the air filter:
1. Remove the 2 screws holding air filter cover in place
(Fig. 19).
2. Remove the cover and lift the filter from the air box
(Fig. 20).
3. Wash the air filter in soap and water. DO NOT USE
GASOLINE!
4. Air dry filter.
5. Reinstall the filter, cover and screws.
NOTE: Replace filter if frayed, torn, damaged or unable
to be cleaned.
Never operate the
unit without the air
filter. The air filter must be kept clean. If it
becomes damaged, install a new filter
CAUTION:
Fig. 19
Fig. 20
Screws
Cover
Air Filter
FUEL CAP AND FUEL FILTER
NOTE: Be sure to keep the vent on the fuel cap free of
debris (Fig. 21).
Remove all fuel from
the unit and store in
an approved container before starting this
procedure. Open the fuel cap slowly to
release any pressure which may have
formed in the fuel tank.
CAUTION:
Never operate the
unit without the fuel
filter. Internal engine damage could result.
CAUTION:
To clean the fuel filter:
1. Lift the fuel line and filter out of the tank. Use a steel
wire with a hook or a paper clip (Fig. 22).
2. Pull the filter off with a twisting motion (Fig. 23).
3. Replace the fuel filter.
Fig. 21
Fuel Cap
Vent
Fig. 23
Steel Wire
Fuel Line
and Filter
Fig. 22
Fuel Filter

Yard Machines MCT333707 Specifications

General

Brand	Yard Machines
Model	MCT333707
Category	Trimmer
Language	English