Yardistry YM11895 - Page 14

14 support@yardistrystructures.com
Hardware
52 x #8 x 2-1/4” Wood Screw
Fig. 3.3
Inside Beam
Assembly
Fig. 3.4
Flush
Outside Beam
Assembly
Step 3: Beam Assembly
Part 2
D: Place one Outside Beam Assembly on one Inside Beam Assembly so the ends are ush. Match the bolt
holes in each (727) Inside Short Beam and (728) Inside Long Beam with the bolt holes in (725) Left Outside
Beam and (726) Right Outside Beam. Attach with 13 #8 x 2-1/4” Wood Screws. (g. 3.3 and 3.4)
E: Repeat Step D three more times to make four Beam Assemblies.
Flush
Outside Beam
Assembly
#8 x 2-1/4” Wood Screws
(x 13 per assembly)
(728)
(727)
(727)
Match bolt holes
Inside Beam
Assembly