Yardistry YM11915 - Page 19

19 support@yardistrystructures.com
4
D: Place one Long Beam Insert centred on the inside of one Inside Beam Assembly (t-nut side). Match the bolt
holes in the Inside Beam Assembly and Long Beam Insert then attach with ten #7 x 3/4” Wood Screws. (F4.4,
F4.5 and F4.6)
E: Repeat Step D for the second Inside Beam Assembly.
Notice orientation
of angled ends
Inside Beam
Assembly
Long Beam
Insert
Hardware
20 x #7 x 3/4” Wood Screw
#7 x 3/4”
Wood Screw
Components:
2 x Long Beam Insert
Inside Beam
Assembly
Inside Beam
Assembly
Long
Beam
Insert
Long Beam
Insert
Match bolt
holes
F4.5
F4.6
F4.4
Notice countersink
holes are on the
screw side
Step 4: Long Beam Assembly
Part 2