YASKAWA CR700

23
YASKAWA AC Drive CR700 Catalog
｜
KAEP C710617 24
｜
YASKA WA
Note
:
1. Perform Rotational Auto
-
Tuning to achieve speci cations listed for Open Loop Vector Control, Close Loop Vector Control and Advanced Open Loop
Vector Control.
2. Install the drive in an environment matching the speci cations in the table above for optimum performance life.
*
Altitudes over 1000 m and up to 3000 m are possible by derating the output current by 1% for every 100 m.
Contact Yaskawa or your nearest sales representative for details.
Item Speci cations
Environment
Area of Use
Indoors
・
chemical gas
:
IEC 60721
-
3
-
3
:
3 C2
・
solid particle
:
IEC 60721
-
3
-
3
:
3 S2
Power Supply Overcurrent Category
III
Ambient Temperature
Open chassis type
(
IP
20
):
-
10
˚C
to +50
˚C
Enclosed wall
-
mounted type
(
UL Type 1
):
−
10
˚C
to
+
40
˚C
・
Do not use the drive in a location where the temperature changes suddenly to improve the drive reliability.
・
When installing the drive in an enclosure, use a cooling fan or air conditioner to keep the internal air temperature in
the permitted range.
・
Do not let the drive freeze.
・
Derate the output current and output voltage to install the drive in areas with ambient temperatures
≤
60
˚C
.
Humidity
95% RH or less
(
no condensation
)
Storage Temperature
Short-term temperature during transportation is -
20
˚C to
+
70
˚C
Surrounding Area
Pollution degree 2 or less
Install the drive in an area without
:
・
Oil mist, corrosive or  ammable gas, or dust
・
Metal powder, oil, water, or other unwanted materials
・
Radioactive materials or  ammable materials, including wood
・
Harmful gas or  uids
・
Salt
・
Direct sunlight
Keep wood or other  ammable materials away from the drive.
Altitude
1000 m or less
*
Shock
・
10 Hz to 20 Hz, 1 G
(
9.8 m/s
2
)
・
20 Hz to 55 Hz, Catalog code CR70 2003 to 2180, 4002 to 4150
:
0.6 G
(
5.9 m/s
2
)
,
Catalog code CR
70 2215 to 2415, 4180 to 4605
:
0.2 G
(
2.0 m/s
2
)
Standards Compliance
・
UL61800
-
5
-
1
・
EN61800
-
3
:
2004+A1
:
2012
・
IEC/EN61800
-
5
-
1
・
Two Safe Disable inputs and 1EDM output according to ISO/EN13849
-
1 Cat.3 Ple
，
IEC/EN61508 SIL3
Note
:
Used by setting functions to multi
-
function digital output terminals.
Protection Design
Open chassis type
(
IP
20
)
, Enclosure wall
-
mounted type
(
UL Type 1
)
Note
:
Installing the UL Type
1 kit to a drive in an open chassis type
(
IP20
)
makes the drive compliant with an
enclosure wall
-
mounted type
(
UL Type 1
)
.
Features
Catalog Code /
Selecting the Capacity
Basic
Instructions
Standard
Speci cations
Standard
Connection Diagram
Terminal
Speci cations
Dimensions
Fully
-
Enclosed
Design
Peripheral Devices
and Options
Application
Notes
Global Service
Network
Standard
Speci cations