YASKAWA E-V Series Selection Manual

xiii
 Safety Precautions That Must Always Be Observed
 General Precautions
DANGER
 Read and understand this manual to ensure the safe usage of the product.
 Keep this manual in a safe, convenient place so that it can be referred to whenever necessary.
Make sure that it is delivered to the final user of the product.
 Do not remove covers, cables, connectors, or optional devices while power is being supplied to
the SERVOPACK.
There is a risk of electric shock, operational failure of the product, or burning.
WARNING
 Use a power supply with specifications (number of phases, voltage, frequency, and AC/DC
type) that are appropriate for the product.
There is a risk of burning, electric shock, or fire.
 Do not attempt to disassemble, repair, or modify the product.
There is a risk of fire or failure.
The warranty is void for the product if you disassemble, repair, or modify it.
CAUTION
 The regenerative resistors, External Dynamic Brake Resistors, and other peripheral devices can
be very hot while power is ON or soon after the power is turned OFF. Implement safety mea-
sures, such as installing covers, so that hands and parts such as cables do not come into con-
tact with hot components.
There is a risk of burn injury.
 For a 24-VDC power supply, use a power supply device with double insulation or reinforced
insulation.
There is a risk of electric shock.
 Do not damage, pull on, apply excessive force to, place heavy objects on, or pinch cables.
There is a risk of failure, damage, or electric shock.
 Do not use the product in an environment that is subject to water, corrosive gases, or flamma-
ble gases, or near flammable materials.
There is a risk of electric shock or fire.
NOTICE
 Do not attempt to use a peripheral device that is damaged or that has missing parts.
 Install external emergency stop circuits that shut OFF the power supply and stops operation
immediately when an error occurs.
 In locations with poor power supply conditions, install the necessary protective devices (such as
AC reactors) to ensure that the input power is supplied within the specified voltage range.
There is a risk of damage to the SERVOPACK.
 Use a Noise Filter to minimize the effects of electromagnetic interference.
Electronic devices used near the SERVOPACK may be affected by electromagnetic interference.
 Always use peripheral devices in the specified combinations.
 Do not touch peripheral devices with wet hands.
There is a risk of product failure.

YASKAWA E-V Series Specifications

General

Brand	YASKAWA
Model	E-V Series
Category	Servo Drives
Language	English