YASKAWA E-V Series Selection Manual

9.4 Serial Converter Unit
9.4.3 External Dimensions
9-32
9.4.3 External Dimensions
Serial Converter Unit without Polarity Sensor Cable
(for Linear Encoder from Dr. JOHANNES HEIDENHAIN
GmbH)
 Model: JZDP-  003- 
Note: 1. Do not connect the unused pins.
2. Contact Dr. JOHANNES HEIDENHAIN GmbH for details on cables (analog 1 Vp-p output, D-sub 15-pin,
male) from Dr. JOHANNES HEIDENHAIN GmbH.
82 ± 0.3
65 ± 0.3
52 ± 0.3
60
33.32 ± 0.4
72
90
1.5
3
14.35 ± 0.3
24.99 ± 0.3
10
22.5
4 × M5 × 10
Unit: mm
2 × #4-40 UNC screws
Linear Encoder-end
analog signal input connector (CN2)
Nameplate
2 × 4.2 dia. holes
4 × 4.2 dia. holes
SERVOPACK-end
serial data output connector (CN1)
2 × #4-40 UNC screws
Pin Signal
1+ 5 V
2Phase-S output
3 Not used
4Not used
50 V
6 /Phase-S output
7Not used
8Not used
9Not used
Case Shield
9
6
1
5
CN1
17-Series Connector:
17LE-13090-27-FA
from DDK Ltd.
(Socket)
SERVOPACK-end
serial data outputs
Pin Signal
1cos input (A+)
20 V
3 sin input (B+)
4+ 5 V
5Not used
6Not used
7/Ref input (R-)
8Not used
9/cos input (A-)
10 0 V sensor
11 /sin input (B-)
12 5 V sensor
13 Not used
14 Ref input (R+)
15 Not used
Case Shield
1
8
9
15
CN2
17-Series Connector:
17LE-13150-27-FA
from DDK Ltd.
(Socket)
Linear Encoder-end
analog signal inputs

YASKAWA E-V Series Specifications

General

Brand	YASKAWA
Model	E-V Series
Category	Servo Drives
Language	English