Notes:
1. In a case other than PS0 = PSI = H, P4 becomes parity bit.
) For example, in BCDsetting, when PS0"= L and PSI = 14, and (P'Oto P-3) is 7, data
are output as P4 = H so-that the figure below becomes an odd number (3) completely
at low level with PO= L, P1 : L, P2 : L and P3 : 1t.
PS0 ___]
PSl ---[
P-'-O ---l "1"
P1 ____ ..... "2"
P2 i "4" LOW LEVEL NUMBER BECOMES
--- AN ODD NUMBER (3).
PS ___ ,.'
p-'_ "_--[ j
2. Timing with _vhich current value data (station No. is read-out several times must
be as follows.
COIN I
I- ' lOms.(Max.)
STATION NO. DATA (UNST/_BLE)_ (STABLE)
(P0 _P4)
SELECT SIGNALS (P---SO, "P--_)
DATAREAD-IN __1
t 1 :>40ms, t 2 >10ms
-- 113--
To Next Page
Loading...
