YASKAWA HR Series - Page 252

II1 ! DIMENSIONS }
13.1 AC SERVOMOTOR WITH ABSOLUTE ENCODER
(1) M Series Dimensionsinmm(inches)
Drawing 1 USAMED-03Bf__]I, -06B_::jl (Taper Shaft), -09Bf:.-j2 (Straight Shaft)
Ot
-- 14(0551){ ,( I"_ _6"3(0,406) 6(02_
1_3", LM 6(0.2_)J_ ' (0984) 4 (01
OPTICAL 4 (0 '_1 /M10P1.25
"ENCODER MOTOR LG LE / _" 5
-
4. 5 SECT.X-X
KB'_
-- TAPER1/10
Notes : For -.03B!jt .-06Bfjjjl For -09Bf;fj2
I. Plug and clamp are not attached for receptacle connection. -- '
2 Key and keyway comply with JIS B 1301-1976.
(Parallel key, keyway : common class.) Detail of Shaft Extension
3. Motor should be mounted with connectors down.
4. L-'..in the models are as follows according to types of the encoder (P/R).
Standard : S (8192 P/R)
Semi-standard : W (1024 P/RJ
Drawing 2 USAMED-12Bf--j2 to -44Bf;;j2 (Straight Shaft)
LT I.M
2-M8 SCREWS (FOR EYEBOLT)
LG LE LR
OPTICALENCODER MOTOR LC
_---_ *.S;81 _ 4-LZ Detail of Shaft Extension
Notes :
I. Plug and clamp are not attached for receptacle connection.
2. Motor should be mounted with connectors down.
3. L"-,in the models are as follows according to types of the encoder (P/R).
Standard : S (8192 P/R)
Semi-standard : W (1024 P/R)
Drawing 3 USAMKD-60B!-fj2 (Straight Shaft)
L
\ MOTO OREYE*L',
m Q m
COOLINGAIR
RECEPTAcLECOOLINGFAN" I J /_ _ -'_7_- T- Detail of Shaft Extension
4-LZ OIA
/ m._-/-
OPTICAL ENCOOER {./
CONNECTOR
/
MOTOR
CONNECTOR
Notes
1. Plug and clamp are not attached for receptacle connection.
2. Motor should be mounted with connectors down.
3. L"..in the models are as follows according to types of the encoder (P/R).
Standard : S (8192 P/R)
Semi-standard : W (T024 P/R)
- 250 --