YASKAWA HR Series - Page 280

APPENDIX PARAMETER SETTING
AC Servopack type CACR-HR is a position control provided with all constant setting and
function selections using parameters. It is necessary to set the parameters before
use.
For details of each parameter content, refer to the Section 8 in this manual.
This section briefly describes parameter setting in checking method.
When it is required for YASKAWAto set parameters before delivery, fill out your
machine configuration and specifications (sections D) and the required items in Par.
14.7 and contact your YASKAWA representative.
14.1 APPLICATIONS[
14.2 ORDER ELECTRICAL DEVICES
Name Type/Specifications Q'ty
ACServomotor With encoder pulses/rev
AC Servopack
External Position Indicator MCIF-L8 (Sigh + 8-digit)
DG-SW(1 Set) MCIF-D80(Only position reference data)
DG-SW (2 Set) MCIF-D86(Position or speed reference)
Parameter Setter PF803-ASY
-- 278 -