YASKAWA J1000 CIMR-JC series User Manual

EN 2 YASKAWA ELECTRIC TOEP C710606 27C - AC Drive J1000 - Quick Start Guide
Copyright © 2014
YASKAWA ELECTRIC CORPORATION. All rights reserved.
No part of this publication may be reproduced, stored in a retrieval system, or transmitted, in
any form, or by any means, mechanical, electronic, photocopying, recording, or otherwise,
without the prior written permission of YASKAWA. No patent liability is assumed with re-
spect to the use of the information contained herein. Moreover, because YASKAWA is con-
stantly striving to improve its high-quality products, the information contained in this manual
is subject to change without notice. Every precaution has been taken in the preparation of this
manual. Nevertheless, YASKAWA assumes no responsibility for errors or omissions. Nei-
ther is any liability assumed for damages resulting from the use of the information contained
in this publication.

YASKAWA J1000 CIMR-JC series Specifications

General

Series	J1000
Control Method	V/f Control
Overload Capacity	150% for 60 seconds
Frequency Range	0.1 to 400 Hz
Humidity	95% RH or less (non-condensing)
Cooling Method	Fan Cooled
Enclosure Rating	IP20
Type	Variable Frequency Drive
Output Frequency	0.1 to 400 Hz
Protection Features	Overcurrent, Overvoltage, Undervoltage, Overheat
Communication	RS-485
Operating Temperature	-10°C to +50°C
Storage Temperature	-20°C to +60°C
Altitude	1000m or less above sea level
Power Supply	Single-phase or Three-phase
Input Voltage	200-240V or 380-480V
Output Voltage	0 to Input Voltage