vii
Explanation of Warning Labels
The following warning labels are attached to the manipulator and NX100.
Fully comply with the precautions on the warning labels.
• The label described below is attached to the manipulator.
Observe the precautions on the warning labels.
Failure to observe this caution may result in injury or damage to equipment.
Refer to the manipulator manual for the warning label location.
• The following warning labels are attached to NX100.
Observe the precautions on the warning labels.
Failure to observe this warning may result in injury or damage to equipment.
Refer to the NX100 INSTRUCTIONS for the warning label location.
WARNING
WARNING
Do not enter
robot
work area.
WARNING
Moving parts
may cause
injury
WARNING WARNING
High Voltage
Do not open the door
with power ON.
High Voltage
Do not ope the cover.
WARNING
May cause
electric shock.
Ground the earth
terminal based on
local and national
electric code.
To Next Page
Loading...
