9.14 Numeric Key Customize Function
9-91
Analog Output Allocation
Use this function in the KEY ALLOCATION (SIM) window.
Operation Explanation
1 Move the cursor to the “FUNC-
TION” of the key to be allo-
cated and press [SELECT].
The selection dialog box is shown.
2 Select “ANALOG OUTPUT.” The output port number and the output voltage value are shown
in the “ALLOCATION CONTENT”.
To change the output port No. or output voltage value, move the
cursor to the No. or voltage value and press [SELECT]. Numeric
values can now be entered. Input the number or voltage value to
be changed, and press [ENTER].
Main Menu ShortCut
EDIT
DISPLAY
UTILITY
DATA
APPLI. NO.: 1
KEY ALLOCATION (SIM)
KEY
-
.
1
2
3
0
4
5
6
7
8
9
FUNCTION
ALTERNATE
PULSE
4BIT OUTPUT
ANALOG OUT
MAKER
MAKER
MAKER
MAKER
MAKER
MAKER
ALLOCATION CONTENT
MAKER
NO.: 1
MOMENTARY
NO.: 1
NO.: 1 TIME: 0.01 SEC
NO.: 1 OUT: 0
NO.: 1 OUT: 0.00
To Next Page
Loading...
