YASKAWA motoman NX100

To Next Page

To Previous Page

9.17 Changing the Parameter Setting

9-99

9.17 Changing the Parameter Setting

The parameter settings can be changed only by the operator who has the correct user ID

number for the management mode.

The teaching data cannot be entered while releasing software limit.

Operation Explanation

1 Select {PARAMETER} under

the main menu.

2 Select the parameter type. The PARAMETER window is shown. Select the desired parame-

ter.

3 Move the cursor to the param-

eter number whose setting is

to be changed.

When the desired parameter number is not in the present window,

move the cursor to a parameter number and press [SELECT].

Enter the desired parameter number with the Numeric keys and

press [ENTER]. The cursor moves to the selected parameter

number.

NOTE

Main Menu ShortCut

EDIT

DISPLAY

UTILITY

DATA

PARAMETER

S2C000

S2C001

S2C002

S2C003

S2C004

S2C005

S2C006

S2C007

S2C008

S2C009

S2C010

S2C011

0000_0000

Binary Data

Decimal Data