9.18 File Initialize
9-101
9.18 File Initialize
9.18.1 Initialize Job File
Operation Explanation
1 Turn the power supply ON
again while pressing [MAIN
MENU] simultaneously.
2 Change the security mode to
management mode.
3 Select {FILE} under the main
menu.
4 Select {INITIALIZE}. The INITIALIZE window is shown.
5 Select {JOB}. The confirmation dialog box is shown.
6 Select “YES.” Job data is initialized.
Main Menu ShortCut
EDIT
DISPLAY
UTILITY
DATA
INITIALIZE
JOB
FILE/GENERAL DATA
PARAMETER
I/O DATA
SYSTEM DATA
Maintenance Mode
Item marked by
can not be selected.
YES NO
Initialize?
To Next Page
Loading...
