5 Installation Procedure
YASKAWA ELECTRIC TOBP C730600 95A U1000-Series Option PS-U10 Installation Manual 23
2.
Connect the option into position with the included screws.
Figure 14
Figure 14 Connect the Option
3.
Pull the loose end of the connection cable out of the drive and connect to CN1 on
the option.
NOTICE: Put the cable connector in the correct position to connect it to the option. An incorrect connection
can cause damage to the connector and the drive.
Figure 15
Figure 15 Plug the Connection Cable into the Option
TOBP_C730600_95A_2_0_E.fm 23 ページ ２０２３年２月１３日 月曜日 午後１時８分
To Next Page
Loading...
