5 Installation Procedure
YASKAWA ELECTRIC TOBP C730600 95A U1000-Series Option PS-U10 Installation Manual 29
2.
Connect the option into position with the included screws and studs.
Figure 22
Figure 22 Connect the Option
3.
Connect one end of the included connection cable A to CN1 on the option. Connect
the other end to CN19 on the drive.
NOTICE: Put the cable connector in the correct position to connect it to the drive and option. An incorrect
connection can cause damage to the connector and the drive.
Figure 23
Figure 23 Plug the Connection Cable
CN1
CN19
TOBP_C730600_95A_2_0_E.fm 29 ページ ２０２３年２月１３日 月曜日 午後１時８分
To Next Page
Loading...
