VC110 Video Conferencing Endpoint Introduction
9
VC110 All-in-one Unit
The VC110 all-in-one unit integrates the camera, the built-in microphone and the codec into a
unit. VC110 all-in-one unit compresses outgoing video and audio data, transmits this
information to the far end, and decompresses incoming data. It supports 16:9 and 4:3 aspect
ratios. It can be compatible with different audio output devices, and can adapt to the display
devices automatically.
Lens cover
The lens cover is used for protecting the lens, which shall not receive dust pollution and all
possible brush, collision.
The front of VC110 all-in-one unit
The HD camera supports 4xdigital zoom, white balance and automatic gain. You can place the
VC110 all-in-one unit on the table or mount it on a wall. The LED indicator in front of the camera
indicates different statuses of the endpoint. For more information, refer to LED Instructions on
page 36.
You can use the remote control to adjust the position or focus of the camera. The VC110 camera
can be panned (± 100 degrees range), tilted (± 30 degrees range).
To Next Page
Loading...
Need help?
General
