Yealink CPE80 Administrator's Guide

Configuring Security Features
249
Configuring Security Features
This chapter provides information for making configuration changes for the following
security-related features:
 User Mode
 Administrator Password
 Web Server Type
 Transport Layer Security
 Secure Real-Time Transport Protocol
 H.235
 Defending against Attacks
User Mode
Users can access the endpoint menus directly (except the “Advanced” menu) on the display
device. The “Advanced” menu requires administrator credentials. You can enable the user mode
to provide two levels of access for the menus. You need to configure a password for the user
when the user mode is enabled. Users are prompted to enter the password when accessing the
menus (except the “Status” menu). After the user mode is enabled, the user can l log into the
web user interface of the endpoint with user credentials. The default user name is “user”.
User mode parameters on the endpoint are described below:
Parameter
Description
Configuration Method
User Type
Specifies the user type.
Default: Administrator
Note: To enable the user type, you
need to select User for this
parameter.
Web User Interface
User Mode
Enables or disables the user mode.
Default: Disabled
Note: It is only applicable to the
user mode. The administrator mode
is enabled by default.
Web User Interface
User Password
Configures a password for the user
to access the menus or log into the
web user interface.
Web User Interface

Yealink CPE80 Specifications

General

Brand	Yealink
Model	CPE80
Category	Conference System
Language	English