Yealink SIP-T21 E2 User Manual

User Guide for the SIP-T21(P) E2 IP Phone
98
Call forward is configurable via web user interface at the path Features->Forward &
DND.
Note
To configure the forward authorized numbers via web user interface:
1. Click on Features->Forward & DND.
2. Select Enabled from the pull-down list of Forward Emergency.
3. Enter the numbers in the Forward Authorized Numbers field.
For multiple numbers, enter a comma between every two numbers.
4. Click Confirm to accept the change.
When call forward is enabled on the phone, the phone cannot forward incoming
calls from the numbers specified in the Forward Authorized Numbers field.
Note
To disable call forward in phone mode:
Do one of the following:
- Press when the phone is idle.
- Press Menu->Features->Call Forward.
You can also enter the SIP URI or IP address in the Forward to field. For more information
on using the SIP URI or IP address, refer to Placing Calls on page 77.
Call forward is local to the phone, and may be overridden by the server settings. Call
forward on code or off code may be different between servers. For more information,
contact your system administrator.
Forward authorized number is configurable via web user interface only.

Yealink SIP-T21 E2 Specifications

General

Brand	Yealink
Model	SIP-T21 E2
Category	IP Phone
Language	English