Basic Call Features
99
Press or to select the desired forwarding type and then press the Enter soft
key.
Press or , or the Switch soft key to select Disabled to disable the call
forward.
Press the Save soft key to accept the change.
To disable call forward in custom mode for a specific account:
1. Press Menu->Features->Call Forward or press when the phone is idle.
2. Press or to select the desired account and then press the Enter soft key.
3. Press or to select the desired forwarding type and then press the Enter
soft key.
4. Press or , or the Switch soft key to select Disabled to disable the call
forward.
5. Press the Save soft key to accept the change.
Dynamic Forwarding
To forward an incoming call to another party:
1. When the phone is ringing, press the FWD soft key.
2. Enter the number you want to forward the incoming call to.
3. Press , , or the Send soft key.
The LCD screen prompts a call forward message.
Note
You can transfer a call to another party in one of three ways:
Blind Transfer: Transfer a call directly to another party without consulting.
Semi-Attended Transfer: Transfer a call when the target phone is ringing.
Attended Transfer: Transfer a call with prior consulting.
When the phone forwards a call, a prompt window will pop up by default, if you want to
disable the feature, contact your system administrator for more information.
To Next Page
Loading...
