EasyManuals Logo

Yealink SIP-T23G Administrator's Guide

Yealink SIP-T23G
572 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #118 background imageLoading...
Page #118 background image
Administrator’s Guide for SIP-T2 Series/T4 Series/T5 Series/CP920 IP Phones
115
Description
It configures whether to use audio encryption service.
Permitted
Values
0-Disabled
1-Optional, the phone will negotiate with the other phone what type of encryption to use for the ses-
sion.
2-Compulsory, the phone must use SRTP during a call.
Default
0
Web UI
Account > Advanced > RTP Encryption (SRTP)
Parameter
account.X.srtp_lifetime
[1]
<MAC>.cfg
Description
It configures the lifetime of the master key used for the cryptographic parameter in SDP. The value spe-
cified is the number of SRTP packets.
When the lifetime is set, a re-invite with a new key is sent when the number of SRTP packets sent for
an outgoing call exceeds half the value of the master key lifetime.
Note: Setting this parameter to a non-zero value may affect the performance of the phone. It works
only if “account.X.srtp_encryption is set to 1 (Optional) or 2 (Compulsory).
Permitted
Values
Integer greater than or equal to 0
0-the master key lifetime is not set.
1 to 1024-the master key lifetime is 1024.
1025 to 2^48-the master key lifetime is the configured value.
A value greater than 2^48-the master key lifetime is 2^48.
Default
0
Parameter
account.X.srtp.unencrypted_rtp.enable
[1]
<MAC>.cfg
Description
It enables or disables the phone’s capability to include unencrypted RTP streams in SDP offers when
using SRTP.
Note: It works only if “account.X.srtp_encryption is set to 1 (Optional) or 2 (Compulsory).
Permitted
Values
0-Disabled
1-Enabled, the phone offers both encrypted and unencrypted RTP streams (Unencrypted RTP
streams carry UNENCRYPTED_SRTP session parameters) in SDP offers. After a successful nego-
tiation, whether the RTP stream is encrypted or not depends on the SDP answer.
Default
0
Parameter
account.X.srtp.unencrypted_rtcp.enable
[1]
<MAC>.cfg
Description
It enables or disables the phone’s capability to include unencrypted RTCP streams in SDP offers
when using SRTP.
Note: It works only if “account.X.srtp_encryption is set to 1 (Optional) or 2 (Compulsory).
Permitted
Values
0-Disabled
1-Enabled, the phone offers both encrypted and unencrypted RTCP streams (Unencrypted RTCP
streams carry UNENCRYPTED_SRTCP session parameters) in SDP offers. After a successful nego-
tiation, whether the RTCP stream is encrypted or not depends on the SDP answer.
Default
0

Table of Contents

Other manuals for Yealink SIP-T23G

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Yealink SIP-T23G and is the answer not in the manual?

Yealink SIP-T23G Specifications

General IconGeneral
BacklightYes
Voice codecsG.711a, G.722.2, G.726, G.729ab, iLBC
Volume controlDigital
Handset typeWired handset
Product typeIP Phone
Product colorBlack, Silver
Display resolution132 x 64 pixels
Lines quantity- lines
Phonebook capacity1000 entries
Number of VoIP accounts3
Networking standardsIEEE 802.1p, IEEE 802.1Q, IEEE 802.1x, IEEE 802.3af
Ethernet LAN (RJ-45) ports2
AC adapter input voltage100 - 240 V
AC adapter output current0.6 A
AC adapter output voltage5 V
Power consumption (typical)1.56 W
Number of handles included- pc(s)
Operating temperature (T-T)-10 - 50 °C
Operating relative humidity (H-H)10 - 95 %
Weight and Dimensions IconWeight and Dimensions
Depth188 mm
Width209 mm
Height150 mm

Related product manuals