Yealink SIP-T23G Administrator's Guide

Call Features
400
Default
0
Web UI
Features > Forward&DND > Forward > Always Forward > On/Off
Phone UI
Menu > Features > Call Forward > Always Forward > Always Forward
Parameter
forward.always.target <y0000000000xx>.cfg
Description
It configures the destination number of the always forward on a phone basis.
Note: It works only if “features.fwd.allow” is set to 1 (Enabled) and “features.fwd_mode” is set to 0
(Phone) (except T19(P) E2/CP920 phones).
Permitted
Values
String within 32 characters
Default
Blank
Web UI
Features > Forward&DND > Forward > Always Forward > Target
Phone UI
Menu > Features > Call Forward > Always Forward > Forward to
Parameter
forward.always.on_code <y0000000000xx>.cfg
Description
It configures the always forward on code to activate the server-side always forward feature.
The phone will send the always forward on code and the pre-configured destination number (con-
figured by the parameter “forward.always.target”) to the server when you activate always forward fea-
ture on a phone basis.
Note: It works only if “features.fwd.allow” is set to 1 (Enabled) and “features.fwd_mode” is set to 0
(Phone) (except T19(P) E2/CP920 phones).
Permitted
Values
String within 32 characters
Default
Blank
Web UI
Features > Forward&DND > Forward > Always Forward > On Code
Phone UI
Menu > Features > Call Forward > Always Forward > On Code
Parameter
forward.always.off_code <y0000000000xx>.cfg
Description
It configures the always forward off code to deactivate the server-side always forward feature.
The phone will send the always forward off code to the server when you deactivate always forward
feature on a phone basis.
Note: It works only if “features.fwd.allow” is set to 1 (Enabled) and “features.fwd_mode” is set to 0
(Phone) (except T19(P) E2/CP920 phones).
Permitted
Values
String within 32 characters
Default
Blank
Web UI
Features > Forward&DND > Forward > Always Forward > Off Code
Phone UI
Menu > Features > Call Forward > Always Forward > Off Code
Parameter
forward.busy.enable <y0000000000xx>.cfg
Description
It triggers the busy forward feature to on or off on a phone basis.
Note: It works only if “features.fwd.allow” is set to 1 (Enabled) and “features.fwd_mode” is set to 0
(Phone) (except T19(P) E2/CP920 phones).
Permitted
0-Off

Yealink SIP-T23G Specifications

General

Backlight	Yes
Voice codecs	G.711a, G.722.2, G.726, G.729ab, iLBC
Volume control	Digital
Handset type	Wired handset
Product type	IP Phone
Product color	Black, Silver
Display resolution	132 x 64 pixels
Lines quantity	- lines
Phonebook capacity	1000 entries
Number of VoIP accounts	3
Networking standards	IEEE 802.1p, IEEE 802.1Q, IEEE 802.1x, IEEE 802.3af
Ethernet LAN (RJ-45) ports	2
AC adapter input voltage	100 - 240 V
AC adapter output current	0.6 A
AC adapter output voltage	5 V
Power consumption (typical)	1.56 W
Number of handles included	- pc(s)
Operating temperature (T-T)	-10 - 50 °C
Operating relative humidity (H-H)	10 - 95 %

Weight and Dimensions

Depth	188 mm
Width	209 mm
Height	150 mm