Yealink SIP-T23G Administrator's Guide

Configuration Parameters
511
reached the maximum number of calls or have waited too long.
Permitted
Values
0-Disabled (power LED indicator does not flash)
1-Enabled (power LED indicator fast flashes (300ms) red)
Default
0
Parameter
features.homescreen_softkey.acd.enable <y0000000000xx>.cfg
Description
It enables or disables the phone to display the ACD soft keys such as Login or Logout on the idle
screen.
Note: It works only if “account.X.acd.enable” is set to 1 (Enabled).
Permitted
Values
0-Disabled
1-Enabled
Default
1
Parameter
bw.virtual_user.1.enable <MAC>.cfg
Description
It enables or disables the virtual account for the call center.
Note: It works only if “bw.xsi.enable” is set to 1 (Enabled).
Permitted
Values
0-Disabled
1-Enabled
Default
0
Supported
Devices
All phones except T48G, T46G, T42G, T41P and T29G
Parameter
bw.virtual_user.1.label <MAC>.cfg
Description
It configures the virtual account label displayed on the phone.
Note: If you leave it blank, the virtual user name uses VirtualUser1 by default.
Permitted
Values
String within 99 characters
Default
Blank
Supported
Devices
All phones except T48G, T46G, T42G, T41P and T29G
Parameter
bw.virtual_user.1.xsi.dnd.enable <MAC>.cfg
Description
It enables or disables the user to control the DND status for the virtual account.
Note: It works only if “bw.virtual_user.1.enable” is set to 1 (Enabled).
Permitted
Values
0-Disabled
1-Enabled
Default
0
Supported
Devices
All phones except T48G, T46G, T42G, T41P and T29G
Parameter
bw.virtual_user.1.xsi.user <MAC>.cfg
Description
It configures the user ID of virtual account for XSI access authentication.
Note: It works only if “bw.xsi.enable” is set to 1 (Enabled).

Yealink SIP-T23G Specifications

General

Backlight	Yes
Voice codecs	G.711a, G.722.2, G.726, G.729ab, iLBC
Volume control	Digital
Handset type	Wired handset
Product type	IP Phone
Product color	Black, Silver
Display resolution	132 x 64 pixels
Lines quantity	- lines
Phonebook capacity	1000 entries
Number of VoIP accounts	3
Networking standards	IEEE 802.1p, IEEE 802.1Q, IEEE 802.1x, IEEE 802.3af
Ethernet LAN (RJ-45) ports	2
AC adapter input voltage	100 - 240 V
AC adapter output current	0.6 A
AC adapter output voltage	5 V
Power consumption (typical)	1.56 W
Number of handles included	- pc(s)
Operating temperature (T-T)	-10 - 50 °C
Operating relative humidity (H-H)	10 - 95 %

Weight and Dimensions

Depth	188 mm
Width	209 mm
Height	150 mm