User Guide SIP-T38G IP Phone
72
2. Press or , or the Switch soft key to select Enable from the Call Completion
field.
3. Press the Save soft key to accept the change or the Back soft key to cancel.
You can also configure call completion via web user interface at the path
Phone->Features->General Information.
To use call completion:
When the called party is busy, the following prompt will appear on the LCD screen of the
phone:
1. Press the OK soft key, the phone returns to the idle screen and call completion is
activated.
2. When the called party becomes idle, the following prompt appears on the LCD
screen of the phone:
To Next Page
Loading...
