Yealink SIP-T38G

User Guide SIP-T38G IP Phone
86
4. Enter the group call pickup code in the Group Call Pickup Code field.
5. Click Confirm to accept the change.
Note
To configure the group call pickup code on a per-line basis via web user interface:
1. Click on Account.
2. Select the desired account from the pull-down list of Account.
3. Click on Advanced.
4. Enter the group call pickup code in the Group Call Pickup Code field.
5. Click Confirm to accept the change.
To pick up a call in the group:
1. Pick up the handset.
The group pickup code above is configured on a global, which applies to all accounts.