Yealink SIP-T41P Quick Start Guide

3
Sign-in
If the Skype for Business Server is configured to forcibly lock the phone. You need to configure an unlock PIN at
the initial sign-in.
Note: Make sure the network connection is correct before login. By default, the phone attempts to contact a DHCP
server in your network to obtain its valid network settings. Contact your system administrator for more
information.
To sign out of the Skype for Business Server:
1. Press the Status soft key when the phone is idle.
or
Change Presence Status
Your presence status is constantly updated by the Skype for Business Server. The presence status on the phone is
synchronized with the Skype for Business Server. You can manually change your presence status on the phone.
1. Press the Status soft key when the phone is idle.
Note: Contact your system administrator if any error appears during the sign-in process or if a specific configuration
is required.
You can select Reset Status to reset the presence status to “Available”.
2. Press or to select the desired presence status.
2. Press to select Sign Out.
Available
Busy
DND
Be Right Back\Off Work\Away
Presence Status Icons on the LCD Screen:
Unknown
Off Line
a. If you select PIN Authentication (Only applicable to Onprem account):
b. If you select User Sign in (Applicable to Onprem account and Online account):
c. If you select Device Pairing for Online (Only applicable to Online account):
2. Press or to select the desired sign-in method.
2) Press the Sign in soft key.
1) Enter the extension and extension PIN in the corresponding field. If Remember password is enabled, the extension
PIN will be filled automatically when you enter the extension next time.
1. Press the Sign in soft key to enter the sign-in screen.
2) Press the Sign in soft key.
1) Enter the user’s sign-in address, name and password in the corresponding field. If Remember password is enabled,
the user name and password will be filled automatically when you enter the sign-in address next time.
2) Enter the URL in the address bar of the web browser on your PC, and then press Enter.
3) Enter your email address to check its validity. If your email address passes validation, enter your Online
account and password, and then enter the pairing code to pair with the phone. The phone will sign into the
Skype for Business Server automatically.
1) Select the desired country, and then press the Sign in soft key, the LCD screen will show the pairing code
and URL.
The sign-in screen displays after initializing. You can sign into Skype for Business Server using PIN Authentication, User
Sign in or Device Pairing for Online method.

Yealink SIP-T41P Specifications

General

Power requirements	AC 100-240V, DC 5V
Power over Ethernet (PoE)	Yes
Touchscreen	-
Display diagonal	2.7 \
Display resolution	192 x 64 pixels
Lines quantity	- lines
Phonebook capacity	1000 entries
Number of VoIP accounts	3
Voice codecs	G.711, G.723, G.726, G.729A, G.729B
Bluetooth	No
Ethernet LAN (RJ-45) ports	2
Storage temperature (T-T)	-10 - 50 °C
Operating relative humidity (H-H)	10 - 95 %
Mounting	Desk/Wall
Handset type	Wired handset
Product type	IP Phone
Product color	Black
Number of handles included	1 pc(s)

Weight and Dimensions

Depth	189 mm
Width	212 mm
Height	175 mm