Yealink SIP-T42G Quick Start Guide

E
N
G
L
I
S
H
5
 If there is more than one call on hold, press or to select the desired call, and then press
the
Resume
soft key.
Call Transfer
You can transfer a call in the following ways:
Blind Transfer
1. Press the
Tran
soft key during an active call. The call is placed on hold.
2. Enter the number you want to transfer to.
3. Press the
Tran
soft key.
Semi-Attended Transfer
1. Press the
Tran
soft key during an active call. The call is placed on hold.
2. Enter the number you want to transfer to, and then press
.
3. Press the
Tran
soft key when you hear the ring-back tone.
Attended Transfer
1. Press the
Tran
soft key during an active call. The call is placed on hold.
2. Enter the number you want to transfer to, and then press
.
3. Press the
Tran
soft key when the second party answers.
Call Forward
To enable call forward:
1. Press the
Menu
soft key when the phone is idle, and then select
Features->Call Forward
.
2. Select the desired forward type:
$OZD\V)RUZDUG
Incoming calls are forwarded unconditionally.
%XV\)RUZDUG
Incoming calls are forwarded when the phone is busy.
No Answer Forward----
Incoming calls are forwarded if not answered after a period of time.
3. Enter the number you want to forward to. For
No Answer Forward
, press
or to select
the desired ring time to wait before forwarding.
4. Press the
6DYH
soft key to accept the change.
Call Conference
1. Press the
Conf
soft key during an active call. The call is placed on hold.
2. Enter the number of the second party, and then press the
Send
soft key.
3. Press the
Conf
soft key again when the second party answers. All parties are now joined in the
conference.
4. Press the
Cancel
soft key to disconnect all parties.
Note:
You can split the conference call into two individual calls by pressing the
Split
soft key.
Speed Dial
7RFRQ¿JXUHDVSHHGGLDONH\
1. Press the
Menu
soft key when the phone is idle, and then select
)HDWXUHV!'66.H\V
.
2. Select the desired DSS key, and then press the
Enter
soft key.
3. Select
Speed Dial
from the
7\SH
field, select the desired line from the
Account ID
field, enter
a label in the
Label
field and enter the number in the
Value
field.
4. Press the
6DYH
soft key to accept the change.
7RXVHWKHVSHHGGLDONH\
Press the speed dial key to dial out the preset number.

Yealink SIP-T42G Specifications

General

Power requirements	100-240V, DC 5V
Power over Ethernet (PoE)	Yes
Touchscreen	-
Display diagonal	2.7 \
Display resolution	192 x 64 pixels
Lines quantity	- lines
Phonebook capacity	1000 entries
Number of VoIP accounts	3
Voice codecs	G.711, G.723, G.729A, G.729B
Bluetooth	No
RJ-9 ports quantity	2
Ethernet LAN (RJ-45) ports	1
Storage temperature (T-T)	-10 - 50 °C
Operating relative humidity (H-H)	10 - 95 %
Mounting	Desk/Wall
Handset type	Wired handset
Product type	IP Phone
Product color	Black, Grey
Number of handles included	1 pc(s)

Weight and Dimensions

Depth	175 mm
Width	212 mm
Height	189 mm