Yealink SIP-T46S - Page 111

BROADSOFT PARTNER CONFIGURATION GUIDE – YEALINK T4X IP PHONE 20-BD5476-00
©
2017 BROADSOFT INC. PAGE 111 OF 150
##It enables or disables NAT Rport feature for account X.0-Disabled,1-
Enabled
##The default value is 0.
account.1.nat.rport =
##########################################################################
#############
## Account1 Advance Settings
##
##########################################################################
#############
##It configures the voice mail number for account X.
##The default value is blank.
voice_mail.number.1 = %BWVOICE-PORTAL-NUMBER-1%
##Except T19P/T21P Models
account.1.auto_dial_enable =
account.1.auto_dial_num =
account.1.call_id_mode =
account.1.call_info =
##########################################################################
#############
## Subscribe
##
##########################################################################
#############
##It enables or disables the phone to subscribe the message waiting
indicator for account X.0-Disabled,1-Enabled.
##The default value is 0.
account.1.subscribe_mwi =
##It is configuration MWI is NOTIFY messages, whether in Terminated status
attributes.
##The default value is 0(Don't handle terminated values)
account.1.mwi_parse_terminated =
##It configures the interval (in seconds) of MWI subscription for account
X.
##The default value is 3600.
account.1.subscribe_mwi_expires =
##It enables or disables the phone to subscribe to the voice mail number
for the message waiting indicator for account X.0-Disabled,1-Enabled.
##The default value is 0.
account.1.subscribe_mwi_to_vm =
##It configures the period (in seconds) of ACD subscription for account X.
##The default value is 1800.Except T19P/T21P Models
account.1.subscribe_acd_expires=
account.1.display_mwi.enable=
##########################################################################
#############
## BLF List(Except T19D Model)
##