EasyManuals Logo

Yealink SIP-T46S Configuration Guide

Yealink SIP-T46S
150 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #65 background imageLoading...
Page #65 background image
BROADSOFT PARTNER CONFIGURATION GUIDE YEALINK T4X IP PHONE 20-BD5476-00
©
2017 BROADSOFT INC. PAGE 65 OF 150
Figure 36 Device Profile Instance
5.2.4 Configure BroadWorks User
Configure the user with the desired BroadWorks configuration and services. Any services
that require a specific configuration on the device are managed via Device Management
and are defined in the device configuration files, if the template files are created with the
correct Device Management tags.
The device profile created in the previous section must be assigned to the BroadWorks
user. Assigning the device profile to the user automatically causes the Device
Management feature to generate the device configuration files for this user’s device.
To assign the device profile to the user, browse to the BroadWorks <user> Addresses.
Customize Tags
This section identifies custom tags used by the Yealink T4x that may need to be
customized at the group or device profile. Customizing a tag at the group level overrides
the setting on the device profile type for the device profiles created within the group.
Customizing a tag at the device profile level overrides the setting at the device profile type
and/or group level for the individual device profile.
5.2.4.1 SBC Address Customization for Edge Device
In many deployments, an edge device, such as an enterprise SBC or application layer
gateway, is deployed on the enterprise edge. The edge device’s SIP server or outbound
proxy setting is configured with the service provider’s SBC IP address or FQDN. If there is
no edge device, the following customization does not apply.

Table of Contents

Other manuals for Yealink SIP-T46S

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Yealink SIP-T46S and is the answer not in the manual?

Yealink SIP-T46S Specifications

General IconGeneral
ManualYes
Cables includedLAN (RJ-45)
Number of handles included1 pc(s)
MountingDesk/Wall
Handset typeWired handset
Product typeIP Phone
Product colorBlack
Voice codecsCNG, G.711Mu, G.711a, G.722, G.723.1, G.726, G.729ab, VAD, iLBC
Lines quantity16 lines
Phonebook capacity1000 entries
Number of VoIP accounts16
Operating temperature (T-T)-10 - 50 °C
Operating relative humidity (H-H)10 - 95 %
Display diagonal4.3 \
Display resolution480 x 272 pixels
AC adapter input voltage100 - 240 V
AC adapter output current2 A
AC adapter output voltage5 V
Dual-Tone Multi-Frequency (DTMF) modesIn-band, Out-of band, SIP info
Volume controlDigital
Number of programmable keys10
USB 2.0 ports quantity1
Ethernet LAN (RJ-45) ports2
Networking standardsIEEE 802.3af
Ethernet LAN data rates10, 100, 1000 Mbit/s
Ethernet LAN interface typeGigabit Ethernet
Supported network protocolsSIP v1, SIP v2, LLDP/CDP/DHCP, OpenVPN, IEEE802.1X, IPv6, FTP/TFTP/HTTP/HTTPS
Harmonized System (HS) code85171800
Weight and Dimensions IconWeight and Dimensions
Depth213 mm
Width244 mm
Height185 mm
Package depth255 mm
Package width274 mm
Package height128 mm

Related product manuals