BROADSOFT PARTNER CONFIGURATION GUIDE – YEALINK T4X IP PHONE 20-BD5476-00
©
2017 BROADSOFT INC. PAGE 41 OF 150
Step Command Purpose
Step 5 account.1.xsi.server_type =
Example:
account.1.xsi.server_type =http
Set the transport type for Xsi.
Step 6 account.1.xsi.port =
Example:
account.1.xsi.port =80
Set the transport port for Xsi.
4.4.2 BroadWorks Directory Configuration
Integration with the BroadWorks Xtended Services Interface for directories enables the
phone to download personal, group, and enterprise directories from BroadWorks and
makes them available to a user via the phone menus. To enable this feature, perform the
following steps.
Step Command Purpose
Step 1 Enable the Network directory to be displayed on the
IP phone.
Example:
bw.xsi.directory.enable =1
Enable the Network directory
to be displayed on the IP
phone.
0 = Disabled
1 = Enabled
Step 2 Enable the group directory to be displayed on the
IP phone.
Example:
bw_phonebook.group_enable = 1
Enable the group directory to
be displayed on the IP phone.
0 = Disabled
1 = Enabled
Step 3 Configure the group directory name displayed on
the IP phone.
Example:
bw_phonebook.group_displayname = Group
Configure “Group” as the group
directory name displayed on
the IP phone.
The default value is “Group”.
Step 4 Configure the group common directory to be
displayed on the IP phone.
Example:
bw_phonebook.group_common_enable = 1
Enable the group common
directory to be displayed on the
IP phone.
0 = Disabled
1 = Enabled
Step 5 Configure the group common directory name
displayed on the IP phone.
Example:
bw_phonebook.group_common_displayname
= GroupCommon
Configure “GroupCommon” as
the group common directory
name displayed on the IP
phone.
The default value is
“GroupCommon”.
Step 6 Configure the enterprise directory to be displayed
on the IP phone.
Example:
bw_phonebook.enterprise_enable = 1
Enable the enterprise directory
to be displayed on the IP
phone.
0 = Disabled
1 = Enabled
Step 7 Configure the enterprise directory name displayed
on the IP phone.
Example:
bw_phonebook.enterprise_displayname =
Configure “Enterprise” as the
enterprise directory name
displayed on the IP phone.
The default value is
“Enterprise”.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
