Yealink SIP-T46S Configuration Guide

BROADSOFT PARTNER CONFIGURATION GUIDE – YEALINK T4X IP PHONE 20-BD5476-00
©
2017 BROADSOFT INC. PAGE 77 OF 150
##0-Auto Negotiate
##1-Full Duplex 10Mbps
##2-Full Duplex 100Mbps
##3-Half Duplex 10Mbps
##4-Half Duplex 100Mbps
##5-Full Duplex 1000Mbps (only applicable to SIP-T42G and SIP-T46G IP
phones)
##The default value is 0.It takes effect after a reboot.
static.network.pc_port.speed_duplex =
##It enables or disables the phone to use manually configured static IPv4
DNS when Internet (WAN) port type for IPv4 is configured as DHCP.
##0-Disabled (use the IPv4 DNS obtained by DHCP) 1-Enabled
##The default value is 0.It takes effect after a reboot.
static.network.static_dns_enable =
static.network.ipv6_static_dns_enable =
###Only T41P/T42G/T46G Models support this parameter
static.network.vlan.pc_port_mode =
##It enable or disable to use A record of TTL
##The defalue value is 1;0-Disable 1-Enable
static.network.dns.ttl_enable =
##It configures the LAN MTU (Except T21D/T19D)
##The default value is 1500,.Integer from 128 to 1500.It takes effect
after a reboot.
static.network.mtu_value =
##########################################################################
#############
## VLAN
##
##########################################################################
#############
static.network.vlan.internet_port_enable =
static.network.vlan.internet_port_vid =
static.network.vlan.internet_port_priority =
static.network.vlan.pc_port_enable =
static.network.vlan.pc_port_vid =
static.network.vlan.pc_port_priority =
static.network.vlan.dhcp_enable =
static.network.vlan.dhcp_option =
##It configures LLDP or manually VLAN can't obtain IP, whether to switch
to other methods of VLAN or closed VLAN to get IP
##(Except T19P/T21P Models) 0-Disable 1-Enable
static.network.vlan.vlan_change.enable =
##########################################################################
#############
## WEB Port
##
##########################################################################
#############
##It configures the HTTP port for web server access.
##The default value is 80.It takes effect after a reboot.
static.network.port.http =
##It configures the HTTPS port for web server access.
##The default value is 443.It takes effect after a reboot.
static.network.port.https =

Yealink SIP-T46S Specifications

General

Manual	Yes
Cables included	LAN (RJ-45)
Number of handles included	1 pc(s)
Mounting	Desk/Wall
Handset type	Wired handset
Product type	IP Phone
Product color	Black
Voice codecs	CNG, G.711Mu, G.711a, G.722, G.723.1, G.726, G.729ab, VAD, iLBC
Lines quantity	16 lines
Phonebook capacity	1000 entries
Number of VoIP accounts	16
Operating temperature (T-T)	-10 - 50 °C
Operating relative humidity (H-H)	10 - 95 %
Display diagonal	4.3 \
Display resolution	480 x 272 pixels
AC adapter input voltage	100 - 240 V
AC adapter output current	2 A
AC adapter output voltage	5 V
Dual-Tone Multi-Frequency (DTMF) modes	In-band, Out-of band, SIP info
Volume control	Digital
Number of programmable keys	10
USB 2.0 ports quantity	1
Ethernet LAN (RJ-45) ports	2
Networking standards	IEEE 802.3af
Ethernet LAN data rates	10, 100, 1000 Mbit/s
Ethernet LAN interface type	Gigabit Ethernet
Supported network protocols	SIP v1, SIP v2, LLDP/CDP/DHCP, OpenVPN, IEEE802.1X, IPv6, FTP/TFTP/HTTP/HTTPS
Harmonized System (HS) code	85171800

Weight and Dimensions

Depth	213 mm
Width	244 mm
Height	185 mm
Package depth	255 mm
Package width	274 mm
Package height	128 mm