Yealink SIP-T46S - Page 95

BROADSOFT PARTNER CONFIGURATION GUIDE – YEALINK T4X IP PHONE 20-BD5476-00
©
2017 BROADSOFT INC. PAGE 95 OF 150
##########################################################################
#############
###Define the login username and password of the user, var and
administrator.
###If you change the username of the administrator from "admin" to
"admin1", your new administrator's username should be configured as:
static.security.user_name.admin = admin1.
###If you change the password of the administrator from "admin" to
"admin1pwd", your new administrator's password should be configured as:
static.security.user_password = admin1:admin1pwd.
###The following examples change the user's username to "user23" and the
user's password to "user23pwd".
###static.security.user_name.user = user23
###static.security.user_password = user23:user23pwd
###The following examples change the var's username to "var55" and the
var's password to "var55pwd".
###static.security.user_name.var = var55
###static.security.user_password = var55:var55pwd
static.security.user_name.user =
static.security.user_name.admin =
static.security.user_name.var =
static.security.user_password =
###It enables or disables the phone to only accept the certificates in the
Trusted Certificates list.
###0-Disabled,1-Enabled.
###The default value is 1.It takes effect after a reboot.
static.security.trust_certificates =
###It configures the source certificates for the phone to authenticate for
TLS connection.
###0-Default certificates,1-Custom certificates,2-All certificates.
###The default value is 0.It takes effect after a reboot.
static.security.ca_cert =
###It configures the static certificates for the phone to send for TLS
authentication.
###0-Default certificates,1-Custom certificates.
###The default value is 0.It takes effect after a reboot.
static.security.dev_cert =
###It enables or disables the phone to mandatorily validate the CommonName
or SubjectAltName of the certificate received from the connecting server.
###0-Disabled,1-Enabled.
###The default value is 0.It takes effect after a reboot.
static.security.cn_validation =
##########################################################################
#############
## User Mode
##
##########################################################################
#############
###It enables or disables the 3-level permissions (admin, user, var).
###0-Disabled,1-Enabled.
###The default value is 0.It takes effect after a reboot.
static.security.var_enable =
#web_item_level.url =
http://%BWDEVICEACCESSFQDN%:%BWDEVICEACCESSPORT%/%BWDMSCONTEXT%/%BWDEVICEA
CCESSURI%WebItemsLevel.cfg