BROADSOFT PARTNER CONFIGURATION GUIDE – YEALINK T4X IP PHONE 20-BD5476-00
©
2017 BROADSOFT INC. PAGE 98 OF 150
#8-SMS (Not support T41/T42/T20)
#32-New SMS (Not support T41/T42/T20)
#47-XML Directory (Not support T20)
#44-Network Directory (Not support T20)
#41-Zero Touch (Not support T41/T42/T46)
#34-Hot Desking (Only support T19/T46
#51-Switch Account Up (Only support T41/T42/T46)
#52-Switch Account Down (Only support T41/T42/T46)
###programablekey.X.type =
###programablekey.X.line =
###programablekey.X.value =
###programablekey.X.xml_phonebook =
###programablekey.X.history_type =
###programablekey.X.label =
###programablekey.X.pickup_value =
###programablekey.X.extension =
###It configures the key feature for the programmable key X.
programablekey.1.type = 28
###It configures the desired line to apply the programmable key feature.
programablekey.1.line =
###It configures the value of the programmable key feature.
###For example, when configuring the key feature to be Speed Dial, it
configures the number.
###The default value is blank.
programablekey.1.value =
###It configures the desired local group/XML group/network group for the
programmable key.
###It only applies to the Local Group, XML Group and Network Group
features.
###XML Group and Network Group features are not applicable to SIP-T20P IP
phones.
programablekey.1.xml_phonebook =
###It configures the history type of programmable key.
###0-Local History,1-Network History.
###The default value is 0.
programablekey.1.history_type =
###It configures the label displayed on the LCD screen for each soft key.
###The default value is blank.
programablekey.1.label = Call Log
###It configures conference ID followed by the # sign for Meet-Me
conference feature.
###It only applies to Meet-Me conference feature.
###The default value is blank.
programablekey.1.pickup_value =
programablekey.2.type = 44
programablekey.2.line =
programablekey.2.value =
programablekey.2.xml_phonebook =
programablekey.2.history_type =
programablekey.2.label = BSFT Dir
programablekey.2.pickup_value =
##########################################################################
#############
To Next Page
Loading...
