Yealink SIP-T46U - Receive a Call

AireSpring
Yealink Ultra-elegant Gigabit IP Phone SIP-T46U
Startup
After the IP phone is connected to the network and supplied with power, it automatically
begins the initialization process.
HTTP to the device with admin / admin logon, you can look up the IP address via Menu/
Status. Navigate to Settings / Auto Provision and set IPv4 Custom Option to 160.
Save the change and reboot the device.
If the connected router is not correctly congured for Airespring DHCP settings you can
alternatively turn o DHCP Active and set the Provisioning Server URL manually to https://
commportal.airespring.com/sip-ps/ . Then reboot the phone.
Basic Call Features
Placing a Call
Using the handset:
1. Pick up the handset.
2. Enter the number, and then press the Send soft key.
Using the speakerphone:
1. With the handset on-hook, press .
2. Enter the number, and then press the Send soft key.
Using the headset:
1. With the headset connected, press to activate the headset mode.
2. Enter the number, and then press the Send soft key.
Note: During a call, you can alternate between the headset, hands-free speakerphone and handset modes
by pressing the HEADSET key, the Speakerphone key or by picking up the handset. Headset mode requires a
connected headset.
5