EasyManuals Logo

Yealink SIP-T53 Administrator's Guide

Yealink SIP-T53
572 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #107 background imageLoading...
Page #107 background image
Security Features
104
Note: It works only if “static.security.var_enable is set to 1 (Enabled).
Permitted
Values
0-user
1-var
2-admin
Default
0
[1]
If you change this parameter, the phone will reboot to make the change take effect.
Auto Logout Time
Auto logout time defines how long the phone will log out of the web user interface automatically when you do not
perform any actions on the web user interface. Once logging out, you must re-enter username and password for
web access authentication.
Topic
Auto Logout Time Configuration
Auto Logout Time Configuration
The following table lists the parameter you can use to configure the auto logout time.
Parameter
features.relog_offtime <y0000000000xx>.cfg
Description
It configures the timeout interval (in minutes) for web access authentication.
Permitted
Values
Integer from 1 to 1000
Default
5
Web UI
Features > General Information > Auto Logout Time(1~1000min)
Phone Lock
You can lock the IP phone to prevent it from unauthorized use. Once the IP phone is locked, anyone must enter the
password to unlock it.
Yealink phones offer three types for phone lock:
l
Lock the Menu soft key: it prevents unauthorized users from accessing the menu, changing the personal set-
tings for your phone.
l
Lock the Function keys: it only allows unauthorized users to use the keypad for placing a call, answering or
rejecting an incoming call and ending a call.
l
Lock all keys: it only allows unauthorized users to use the keypad for dialing an emergency number or author-
ized numbers that set up by your administrator, answer or reject an incoming call and ending a call. The
T57W/T48U/T48S/T48G phones only support All Keys type of phone lock.
You can set a waiting time after which the phone is locked automatically. If the waiting time is set to 0, the phone will
not be automatically locked. You need to lock the phone manually.
Note: The Volume key, HEADSET key and Speakerphone key are always available even when you lock the phone.
Topics
Operation Behaviors on Lock Phone
Phone Lock Configuration

Table of Contents

Other manuals for Yealink SIP-T53

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Yealink SIP-T53 and is the answer not in the manual?

Yealink SIP-T53 Specifications

General IconGeneral
NetworkDual-port Gigabit Ethernet
SIP Accounts12
Lines12
Stand IncludedYes
PoEYes (IEEE 802.3af)
USB Port1 x USB 2.0
Headset SupportRJ9 and USB
Audio FeaturesHD Voice
Expansion Module SupportYes, up to 3
Voice CodecsG.722, G.711
Network FeaturesIPv4/IPv6, VLAN, QoS
Local Phonebook1000 entries
MountingDesk mount, Wall mount
Power SupplyOptional
Weight1.1 kg
Resolution360 x 160

Related product manuals