EasyManuals Logo

Yealink SIP-T53 Administrator's Guide

Yealink SIP-T53
572 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #158 background imageLoading...
Page #158 background image
Administrator’s Guide for SIP-T2 Series/T4 Series/T5 Series/CP920 IP Phones
155
Description
It configures the internal ringer text to map the keywords contained in the Alert-Info header.
Permitted
Values
String within 32 characters
Default
Blank
Web UI
T57W/T54W/T53W/T53/T48U/T46U/T43U/T42U:
Settings > Ring > Internal Ringer X
[2]
> Text
Other Phones:
Settings > Ring > Internal Ringer Text
Parameter
distinctive_ring_tones.alert_info.X.ringer
[2]
<y0000000000xx>.cfg
Description
It configures the desired ring tone for each internal ringer text.
Permitted
Values
l Integer from 1 to 10 (the digit stands for the appropriate ring tone) or ring tone name:
1 or Ring1.wav
2 or Ring2.wav
3 or Ring3.wav
4 or Ring4.wav
5 or Ring5.wav
6 or Ring6.wav
7 or Ring7.wav
8 or Ring8.wav
9 or Silent.wav
10 or Splash.wav
l Custom ring tone name (for example, Customring.wav)
Default
1
Web UI
T57W/T54W/T53W/T53/T48U/T46U/T43U/T42U:
Settings > Ring > Internal Ringer X
[2]
> File
Other Phones:
Settings > Ring > Internal Ringer File
[1]
X is the account ID. For T57W/T54W/T48U/T48S/T48G/T46U/T46S/T46G/T29G, X=1-16; for
T53W/T53/T43U/T42G/T42U/T42S, X=1-12; for T41P/T41S/T27G, X=1-6; for T40P/T40G/T23P/T23G, X=1-3; for T21
(P) E2, X=1-2; for T19(P) E2/CP920, X=1.
[2]
X is the ring tone ID. X=1-10.
Ringer Device
You can use either or both the speaker and the headset as the ringer devices. You can configure which ringer
device to be used when receiving an incoming call. For example, if the ringer device is set to Headset, ring tone will
be played through your headset.
If the ringer device is set to Headset or Headset&Speaker, the headset (either a wired headset, Bluetooth headset
or USB headset) should be connected to the IP phone and the headset mode also should be activated in advance.
The USB headset is only applicable to T57W/T54W/T53W/T53/T48U/T48S/T46U/T46S/T43U/T42S/T42U/T41S
phones.
You can press the HEADSET key to activate the headset mode. For more information, refer to the Yealink phone-
specific user guide.
It is not applicable to CP920 phones.

Table of Contents

Other manuals for Yealink SIP-T53

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Yealink SIP-T53 and is the answer not in the manual?

Yealink SIP-T53 Specifications

General IconGeneral
NetworkDual-port Gigabit Ethernet
SIP Accounts12
Lines12
Stand IncludedYes
PoEYes (IEEE 802.3af)
USB Port1 x USB 2.0
Headset SupportRJ9 and USB
Audio FeaturesHD Voice
Expansion Module SupportYes, up to 3
Voice CodecsG.722, G.711
Network FeaturesIPv4/IPv6, VLAN, QoS
Local Phonebook1000 entries
MountingDesk mount, Wall mount
Power SupplyOptional
Weight1.1 kg
Resolution360 x 160

Related product manuals