Phone Provisioning
80
phone.
If it is set to “any”, you can use IP address or any domain name to access the web user interface of the
phone.
Default
any
Web Server Type Configuration
Yealink phones support both HTTP and HTTPS protocols for accessing the web user interface. You can configure
the web server type. Web server type determines the access protocol of the web user interface. If you disable to
access the web user interface using the HTTP/HTTPS protocol, both you and the user cannot access the web user
interface.
The following table lists the parameters you can use to configure the web server type.
Parameter
static.wui.http_enable
[1]
<y0000000000xx>.cfg
Description
It enables or disables to access the web user interface of the phone over a non-secure tunnel (HTTP).
Permitted
Values
0-Disabled
1-Enabled
Default
1
Web UI
Network > Advanced > Web Server > HTTP
Phone UI
Color Screen Phones:
Menu > Advanced (default password: admin) > Network > Web Server > HTTP Status
Black-and-white Screen Phones:
Menu > Settings > Advanced Settings (default password: admin) > Network > Web Server > HTTP
Status
Parameter
static.network.port.http
[1]
<y0000000000xx>.cfg
Description
It configures the port used to access the web user interface of the phone over a non-secure tunnel
(HTTP).
Permitted
Values
Integer from 1 to 65535
Default
80
Web UI
Network > Advanced > Web Server > HTTP Port (1~65535)
Phone UI
Color Screen Phones:
Menu > Advanced (default password: admin) > Network > Web Server > HTTP Port
Black-and-white Screen Phones:
Menu > Settings > Advanced Settings (default password: admin) > Network > Web Server > HTTP
Port
Parameter
static.wui.https_enable
[1]
<y0000000000xx>.cfg
Description
It enables or disables to access the web user interface of the phone over a secure tunnel (HTTPS).
Permitted
Values
0-Disabled
1-Enabled
Default
1
Web UI
Network > Advanced > Web Server > HTTPS
Phone UI
Color Screen Phones:
To Next Page
Loading...
Need help?
General
